M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards

$70.04

In stock

Added to wishlistRemoved from wishlist 0

Free worldwide shipping


ships from: CN


shipping time: 7-20 business days (dispatches in 24 hours)


payment method: Paypal or credit card


Description:
M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.
The MCU is an ESP32 model D0WDQ6-V3 and has dual core Xtensa® 32-bit 240Mhz LX6 processors that can be controlled separately. WiFi and Bluetooth are supported as standard and it includes an on board 16MB Flash and 8MB PSRAM, USB TYPE-C interface for charging, downloading of programs and serial communication, a 2.0-inch integrated capacitive touch screen, and a built-in vibration motor.
M5Core2 also features a built-in RTC module which can provide accurate timing. The power supply is managed by an AXP192 power management chip, which can effectively control the power consumption of the base and a built-in green LED power indicator helps to notify the user of battery level. The battery capacity has been upgraded to 390mAh, which can power the core for much longer than the previous model.
The M5Core2 retains the SD card slot and speakers. However, in order to ensure higher quality sound output, the I2S digital audio interface power amplifier chip is used to effectively prevent signal distortion. There are independent power and reset buttons on the left side and bottom of the base.
The 3 icons on the front of the screen are capacitive buttons which are programmable. There is a small expansion board on the back of the base with a 6-axis IMU sensor and microphone. The development platform and programming language supported by M5Stack Core2: Arduino, UIFlow (using Blockly, MicroPython language) No matter what level of your development and programming skills, M5Stack will help You gradually turn your ideas into reality.
Power on/off:
Power on: click the power button
Power off: press the power button for 6s
Restart: Click the RST button at the bottom
Features:
ESP32-based, built-in Bluetooth,WiFi
16M Flash,8M PSRAM
Built-in speaker, power indicator, vibration motor, RTC, I2S amplifier, capacitive touch screen, power button, reset button
TF card slot (16G Maximum size)
Built-in lithium battery, equipped with power management chip
Independent small board built-in 6-axis IMU, PDM microphone
M-Bus Socket & Pins
Program Platform: UIFlow, MicroPython, Arduino
Package Included:
1x M5Stack Core2
1x Type-C USB(20cm)
Applications
Internet of things terminal controller
Stem education product
DIY creation
Smart home equipment
Specification:

Resources Parameter
ESP32-D0WD-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth
Flash 16MB
PSRAM 8MB
Input Voltage 5V @ 500mA
Interface TypeC x 1, GROVE(I2C+I/0+UART) x 1
IPS LCD Screen 2.0’@320*240 ILI9342C
Touch Screen FT6336U
Speaker 1W-0928
LED Green power indicator light
Button Power button, RST button, Virtual screen button*3
Vibration reminder Vibration motor
MIC SPM1423
I2S Power Amplifier NS4168
6-axis IMU MPU6886
RTC BM8563
PMU AXP192
USB Chip CP2104
DC-DC Boost SY7088
TF card slot 16G Max.
Lithium Battery 390mAh @ 3.7V
Antenna 2.4G 3D antenna
Operating temperature 32°F to 104°F ( 0°C to 40°C )
Net Weight 52g
Gross Weight 70g
Product Size 54 x 54 x 16mm
Package Size 75 x 60 x 20mm
Case Material Plastic ( PC )
EasyLoader:
EasyLoader is a concise and fast program writer, which has a built-if program related to the product. It can be burned to the main control by simple steps to perform a series of function verification. Please install the corresponding driver according to the device type. M5Core host Please click here to view the CP210X driver installation tutorial, M5StickC/V/T/ATOM series can be used without driver)
PinMap:
LCD & TF card
LCD :320×240 TF card Maximum size 16GB
ESP32 Chip GPIO38 GPIO23 GPIO18 GPIO5 GPIO15
AXP192 Chip AXP_IO4 AXP_DC3 AXP_LDO2
ILI9342C MISO MOS1 SCK CS DC RST BL PWR
ESP32 Chip GPIO38 GPIO23 GPIO18 GPIO4
TF Card MISO MOS1 SCK CS
CAP.TOUCH:
ESP32 chip GPIO21 GPIO22 GPIO39
AXP192 AXP_IO4
FT6336U SDA SCL INT RST
Mic & NS4168:
ESP32 Chip GPIO12 GPIO0 GPIO2 AXP_IO2 GPIO34
NS4168 BCLK LRCK DATA SPK_EN
Mic CLK DATA
AXP Power Indicator Light:
AXP192 AXP_IO1 AXP_LDO3
Green LED Vcc
Vibration motor Vcc
RTC:
ESP32 Chip GPIO21 GPIO22
AXP192 AXP_PWR
BM8563 SDA SCL INT
IMU(3-axis gyroscope & 3-axis accelerometer):
ESP32 Chip GPIO21 GPIO22
MPU6886 SDA SCL
USB to serial chip:
ESP32 Chip GPIO1 GPIO3
CP2104 RXD TXD
Internal I2C connection:
ESP32 Chip GPIO21 GPIO22
MPU6886 SDA SCL
AXP192 SDA SCL
BM8563 SDA SCL
FT6336U SDA SCL

image_contentimage_contentimage_contentimage_contentimage_contentimage_contentimage_contentimage_content

Specification: M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards

Weight 0.082 kg

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards
M5Stack Core2 ESP32 with Touch Screen Development Board Kit WiFi bluetooth Graphical Programming WiFi BLE IoT M5Stack for Arduino – products that work with official Arduino boards

$70.04

Privacy Policy | Terms and Conditions | Return Policy | Contact | About

@TheOneStore All Rights Reserved

The One Store